Buy in Germany
checked 2026-11-18Sellers, prices and stock as their pages showed them. No enquiry is sent from this site.
No German or EU sales route found. Xpanner (Santa Fe Springs, California) sells or rents the machine with a monthly X1 software subscription and its own field support team; all deployments it names are in the US and Australia.
Checked 2026-11-18. Maker’s page ↗
Key facts
All specifications- Moves on
Tracks
- Height
- Not published
- Weight
- Not published
- Arms
1
- Hands
Process tool
- Payload per arm
- Not published
- Carry on body
- Not published
- Runtime
- Not published
- Max speed
- Not published
- Stairs
- Not published
- Outdoors
Yes
- IP rating
- Not published
Jobs
Specs fit 41
- Blast-clean steel before coatingCorrosion protection on steel structures
- Bring drinks and room-service items to hotel room doorsHotel corridors and room-door handoff points
- Carry meals from the restaurant pass to table handoff pointsRestaurant dining areas
- Collect manure from solid barn floorsDairy cattle barn
- Compact trench backfill layer by layerEarthworks
Show 36 more
- Cut and joint studs and beamsPrefab timber house factory
- Cut stock mesh to size and cut out openingsRebar cage and formwork preparation
- Deliver requested supplies to hospital wardsHospital ward and supply-room routes
- Feed reinforcing bars to the shear and bending machinesRebar cage and formwork preparation
- Fit tilt-and-turn hardware to window sashesJoinery, window and door manufacturing
- Glue and apply multi-layer sheathingPrefab timber house factory
- Handle full OSB and gypsum boardsPrefab timber house factory
- Insert insulation batts into the frame baysPrefab timber house factory
- Insert studs into the framePrefab timber house factory
- Lay and compact an asphalt course with a paver and rollersRoads, paths and paving
- Lay concrete paving blocksRoads, paths and paving
- Load beams onto the drill and saw line and take the cut parts offSteel fabrication shop
- Mechanically weed vegetable rowsOutdoor crop field
- Move meal and linen carts between hospital departmentsHospital corridors and support departments
- Mow new lawns until acceptanceLandscaping
- Nail and staple sheathing to the framePrefab timber house factory
- Pick bagged plaster and mortar onto customer palletsMaterial yard and warehouse
- Pitch and drive steel sheet pilesSpecialist foundation works
- Place electrical boxes, conduit and small inserts before concretingPrecast concrete plant
- Push dairy feed back toward cattleDairy cattle barn
- Recover beverage cartons from paper linesMaterial recovery facility
- Recover light recyclables from residue beltsMaterial recovery facility
- Remix feed along a cattle feed tableDairy cattle barn
- Run the mixing and pumping plant that feeds the printerConstruction 3D printing
- Saw and rout boards, cut openingsPrefab timber house factory
- Scrub corridor, lobby and hall floorsFacility operation and building inspection
- Seed and hoe planned row cropsOutdoor crop field
- Set and strip shutters on the palletPrecast concrete plant
- Sort bulky waste into recoverable fractionsMaterial recovery facility
- Sort construction waste into the separate fractionsConstruction cleaning and waste
- Spot-spray selected plants in supported cropsOutdoor crop field
- Take cut plate parts off the cutting table and sort them by assemblySteel fabrication shop
- Take large-bore pipe bars from the rack and cut them to lengthBuilding-services prefabrication (TGA)
- Turn elements for the second sidePrefab timber house factory
- Unload floor-loaded cartons from containersConstruction logistics hub
- Weld the seams of plastic roofing membranesRoofing and roof waterproofing
Where it has worked
- Made for this work
Launched for autonomous pile driving on utility-scale solar and BESS sites · 2026-10
Xpanner says its X1 Piling automation (on other pile drivers) has been deployed at more than 60 US sites; no named R6 site yet.
The Robot Report ↗
Specifications
7 valuesSpecifications by configuration
1 configurationWhat each version's maker or seller states, with the exact source text. A source label says who makes the claim, not that it is proven; unknown means not published.
Xpanner X1 Piling R67 specifications · 5 research gaps · reviewed Show all 7 specifications and capabilities
- Max. pile length
7.0 m
Exact source text
Quote context: 7.0 m
Handle piles up to 23 ft long, with a maximum driving depth of 15.7 ft.
- Max. driving depth
4.8 m; actual embedment depends on reveal and site
Exact source text
Quote context: 4.8 m; actual embedment depends on reveal and site
Handle piles up to 23 ft long, with a maximum driving depth of 15.7 ft.
- Engine power
130 hp
Exact source text
Quote context: 130 hp
The system includes a 97 kW (130 hp) engine
- Hammer impact energy
up to; three energy settings
Exact source text
Quote context: up to; three energy settings
a high-frequency hydraulic hammer with up to 1,260 J (929 ft.-lb.) of impact energy and three energy settings
- Guide-rail fine positioning
upper body rotates 180°
Exact source text
Quote context: upper body rotates 180°
The guide rail slides 11.8 in. (300 mm) forward and back and 19.7 in. (500 mm) left and right, and the upper body rotates 180 degrees
- Operators
supervises via remote control
Exact source text
Quote context: supervises via remote control
Supervised by a single operator, the system uses high-precision GNSS and onboard sensors to place each pile accurately
- Business model
- machine purchase or rental plus monthly X1 software subscriptionReported · pressThe Robot Report ↗ · checked
Exact source text
Customers purchase (or rent) the X1 Piling robot and then license the automation software on a monthly subscription basis for each active technology.
Capabilities and equipment
- Legs
- NoField-level source not recorded
- Wheels
- NoField-level source not recorded
- Tracks
- YesField-level source not recorded
- Level floors
- NoField-level source not recorded
- Rough ground
- YesField-level source not recorded
- Stairs
- Not applicable
- Outdoor use
- YesField-level source not recorded
- Number of arms
- 1Field-level source not recorded
- Hands or end effectors
- ToolField-level source not recorded
- Hands included
- YesField-level source not recorded
- Payload per arm
- Unknown
- Payload on body or base
- Unknown
- Runtime
- Unknown
- IP rating
- Unknown
- SDK / development interface
- Unknown
Operating conditions and configuration notes
- Arm = pile-driving mast with hydraulic hammer; Everstar R6 crawler base machine.
- roughGround set true for open solar-field ground, not a sourced spec.
- Records each pile's position, depth and plumb to the Xpanner Connect web dashboard.
- Designed to work with Xpanner's X1 Panel Lift for module installation.
Still missing for Xpanner X1 Piling R6
Payload per arm · Payload · Runtime · IP rating · SDK / development interface
Background sources for the capability record
These sources are attached to the record as a whole. Only a source displayed beside a value is linked to that field.
- X1 Piling R6: the all-new solar piling machine powered by Xpanner automation ↗Manufacturer source · checked
- Xpanner launches autonomous pile driver for solar farm construction (27 October 2026) ↗Reported · press · checked
More detail
Evidence profileShowHide
Robot evidence profile
CheckedEvidence for each configuration
Claims, demonstrations, pilots and deployments describe different levels of evidence. A demonstration does not establish working-site readiness.
Xpanner X1 Piling R61 published claim · 4 missing capability fields
- Published claim
Launched for autonomous pile driving on utility-scale solar and BESS sites
Location not recorded · 2026-10
Xpanner says its X1 Piling automation (on other pile drivers) has been deployed at more than 60 US sites; no named R6 site yet.
The Robot Report ↗ · Reported · press · checked
What is still missing
Payload per arm · Payload · Runtime · IP rating
- Purchase, rental and subscription prices are not published.
- Machine weight and fuel tank size are not stated on the pages read.
- Is there any plan to sell or support the R6 in Europe?
Sources
2 pages- X1 Piling R6: the all-new solar piling machine powered by Xpanner automation ↗Xpanner Inc. · manufacturer · checked 2026-11-18
- Xpanner launches autonomous pile driver for solar farm construction (27 October 2026) ↗The Robot Report · press · checked 2026-11-18