sitebots
Job-specific robotAvailable to order

Xpanner X1 Piling (X1 Kit)

by Xpanner Inc. · US · Configuration: X1 Kit retrofit for existing pile drivers such as Vermeer PD10

Retrofit automation kit (controller, sensor and AI module, dashboard) that turns an existing solar pile driver such as the Vermeer PD10 into a one-touch machine that drives, aligns, hammers and checks plumb by itself. Xpanner says it has been used at more than 60 US sites.

No picture published

Buy in Germany

checked 2026-11-18

Sellers, prices and stock as their pages showed them. No enquiry is sent from this site.

Not sold hereNot sold in Germany

No German or EU sales route found. Xpanner (Santa Fe Springs, California) installs the kit, trains operators and gives field support itself; the deployments it lists are in Arizona, Texas, Colorado, Missouri and Australia.

Checked 2026-11-18. Maker’s page ↗

Key facts

All specifications
Moves on

Tracks

Height
Not published
Weight
Not published
Arms

1

Hands

Process tool, not included

Payload per arm
Not published
Carry on body
Not published
Runtime
Not published
Max speed
Not published
Stairs
Not published
Outdoors

Yes

IP rating
Not published

Jobs

Specs fit 41

  • Blast-clean steel before coatingCorrosion protection on steel structures
  • Bring drinks and room-service items to hotel room doorsHotel corridors and room-door handoff points
  • Carry meals from the restaurant pass to table handoff pointsRestaurant dining areas
  • Collect manure from solid barn floorsDairy cattle barn
  • Compact trench backfill layer by layerEarthworks
Show 36 more
  • Cut and joint studs and beamsPrefab timber house factory
  • Cut stock mesh to size and cut out openingsRebar cage and formwork preparation
  • Deliver requested supplies to hospital wardsHospital ward and supply-room routes
  • Feed reinforcing bars to the shear and bending machinesRebar cage and formwork preparation
  • Fit tilt-and-turn hardware to window sashesJoinery, window and door manufacturing
  • Glue and apply multi-layer sheathingPrefab timber house factory
  • Handle full OSB and gypsum boardsPrefab timber house factory
  • Insert insulation batts into the frame baysPrefab timber house factory
  • Insert studs into the framePrefab timber house factory
  • Lay and compact an asphalt course with a paver and rollersRoads, paths and paving
  • Lay concrete paving blocksRoads, paths and paving
  • Load beams onto the drill and saw line and take the cut parts offSteel fabrication shop
  • Mechanically weed vegetable rowsOutdoor crop field
  • Move meal and linen carts between hospital departmentsHospital corridors and support departments
  • Mow new lawns until acceptanceLandscaping
  • Nail and staple sheathing to the framePrefab timber house factory
  • Pick bagged plaster and mortar onto customer palletsMaterial yard and warehouse
  • Pitch and drive steel sheet pilesSpecialist foundation works
  • Place electrical boxes, conduit and small inserts before concretingPrecast concrete plant
  • Push dairy feed back toward cattleDairy cattle barn
  • Recover beverage cartons from paper linesMaterial recovery facility
  • Recover light recyclables from residue beltsMaterial recovery facility
  • Remix feed along a cattle feed tableDairy cattle barn
  • Run the mixing and pumping plant that feeds the printerConstruction 3D printing
  • Saw and rout boards, cut openingsPrefab timber house factory
  • Scrub corridor, lobby and hall floorsFacility operation and building inspection
  • Seed and hoe planned row cropsOutdoor crop field
  • Set and strip shutters on the palletPrecast concrete plant
  • Sort bulky waste into recoverable fractionsMaterial recovery facility
  • Sort construction waste into the separate fractionsConstruction cleaning and waste
  • Spot-spray selected plants in supported cropsOutdoor crop field
  • Take cut plate parts off the cutting table and sort them by assemblySteel fabrication shop
  • Take large-bore pipe bars from the rack and cut them to lengthBuilding-services prefabrication (TGA)
  • Turn elements for the second sidePrefab timber house factory
  • Unload floor-loaded cartons from containersConstruction logistics hub
  • Weld the seams of plastic roofing membranesRoofing and roof waterproofing

Where it has worked

  • In daily use

    Automated solar pile driving on real job sites · More than 60 sites across the United States (Arizona, Texas, Colorado, Missouri) and Australia · 2026-10

    Site count from the maker; the X1 Piling page also lists the same states and Australia.

    Xpanner Inc. ↗

Specifications

5 values

Specifications by configuration

1 configuration

What each version's maker or seller states, with the exact source text. A source label says who makes the claim, not that it is proven; unknown means not published.

Xpanner X1 Piling (X1 Kit)X1 Kit retrofit for existing pile drivers such as Vermeer PD105 specifications · 5 research gaps · reviewed Show all 5 specifications and capabilities
Compatible carrier
existing pile drivers, e.g. Vermeer PD10Manufacturer sourceXpanner Inc. ↗ · checked
Exact source text
Designed for seamless integration with leading models like Vermeer’s PD10
Personnel for the piling process
6 → 1 peopleManufacturer sourceXpanner Inc. ↗ · checked

maker claim, whole process incl. surveying and marking

Exact source text

Quote context: maker claim, whole process incl. surveying and marking

Reduced total requiredpersonnel for the entireprocess from six to just one.
Time saving
57 %Manufacturer sourceXpanner Inc. ↗ · checked

maker claim for pile installation time

Exact source text

Quote context: maker claim for pile installation time

↓57%
On-machine hardware
Mango automation controller and M2 Physical AI moduleManufacturer sourceXpanner Inc. ↗ · checked
Exact source text
On-Machine HardwareMango: Automation Controller
Vermeer PD10 undercarriage
steel track with urethane padsReported · sellerVermeer Iowa ↗ · checked

base machine named by Xpanner

Exact source text

Quote context: base machine named by Xpanner

Steel track with urethane pads

Capabilities and equipment

Legs
NoField-level source not recorded
Wheels
NoField-level source not recorded
Tracks
YesField-level source not recorded
Level floors
NoField-level source not recorded
Rough ground
YesField-level source not recorded
Stairs
Not applicable
Outdoor use
YesField-level source not recorded
Number of arms
1Field-level source not recorded
Hands or end effectors
ToolField-level source not recorded
Hands included
NoField-level source not recorded
Payload per arm
Unknown
Payload on body or base
Unknown
Runtime
Unknown
IP rating
Unknown
SDK / development interface
Unknown

Operating conditions and configuration notes

  • Kit only: the pile driver (mast and hammer, tracked carrier such as the Vermeer PD10) is the customer's own machine, so handsIncluded is false.
  • roughGround set true for open solar-field ground, not a sourced spec.
  • Xpanner Connect dashboard shows production data and plan vs. as-built checks.

Still missing for Xpanner X1 Piling (X1 Kit)

Payload per arm · Payload · Runtime · IP rating · SDK / development interface

Background sources for the capability record

These sources are attached to the record as a whole. Only a source displayed beside a value is linked to that field.

More detail

Evidence profileShow

Robot evidence profile

Checked

Evidence for each configuration

Claims, demonstrations, pilots and deployments describe different levels of evidence. A demonstration does not establish working-site readiness.

Xpanner X1 Piling (X1 Kit)1 deployment · 4 missing capability fields

Configuration: X1 Kit retrofit for existing pile drivers such as Vermeer PD10

  1. Deployment

    Automated solar pile driving on real job sites

    More than 60 sites across the United States (Arizona, Texas, Colorado, Missouri) and Australia · 2026-10

    Site count from the maker; the X1 Piling page also lists the same states and Australia.

    Xpanner Inc. ↗ · Manufacturer source · checked

What is still missing

Payload per arm · Payload · Runtime · IP rating

  • Which pile driver models besides the Vermeer PD10 are supported?
  • Kit price and subscription terms are not published.
  • Accuracy figures (position, plumb) are not stated on the pages read.
View configuration specifications and source text

Sources

3 pages