Buy in Germany
checked 2026-11-18Sellers, prices and stock as their pages showed them. No enquiry is sent from this site.
No German or EU seller found. WEIBUILD says its plastering and spraying robot series passed EU CE certification in August 2026 and that it is expanding into Europe; enquiries go to the maker in Shanghai (overseas phone and WhatsApp on the site).
Checked 2026-11-18. Maker’s page ↗
Key facts
All specifications- Moves on
Wheels
- Height
- Not published
- Weight
- Not published
- Arms
None
- Hands
Process tool
- Payload per arm
Not applicable
- Carry on body
- Not published
- Runtime
- Not published
- Max speed
- Not published
- Stairs
- Not published
- Outdoors
- Not published
- IP rating
- Not published
Jobs
In daily use 1
- Spray and level machine-applied gypsum plasterIn daily use · Hong Kong Park, Hetao Shenzhen-Hong Kong Science and Technology Innovation Cooperation Zone
Where it has worked
- In daily use
Plastered 5.5 m high interior walls of a lab and apartment complex (construction area 30,000 m²) at 40.77 m²/h · Hong Kong Park, Hetao Shenzhen-Hong Kong Science and Technology Innovation Cooperation Zone · 2026-11
Maker case report names its 'high wall plastering robot'. Cement plaster, not gypsum.
Shanghai WEIBUILD Technology Co., Ltd. ↗
Specifications
9 valuesSpecifications by configuration
1 configurationWhat each version's maker or seller states, with the exact source text. A source label says who makes the claim, not that it is proven; unknown means not published.
WEIBUILD PMC-6000iC Plastering Robothigh-wall plastering robot, 5.4 m9 specifications · 6 research gaps · reviewed Show all 9 specifications and capabilities
- Plastering height
PMC-3000iE version: 3.3 m
Exact source text
Quote context: PMC-3000iE version: 3.3 m
5.4m
- Length × width × height
spec table lists Length 900mm, Width 1100mm, Height 1800mm
Exact source text
Quote context: spec table lists Length 900mm, Width 1100mm, Height 1800mm
1100mm
- Plastering rate
maker figure for the series; 3 minutes per plastering cycle
Exact source text
Quote context: maker figure for the series; 3 minutes per plastering cycle
High Operational Efficiency, 3-Minute Per Plastering, 50㎡/hour, Daily output of 300-350㎡.
- Plastering rate on site
5.5 m high interior walls, Hetao Hong Kong Park project
Exact source text
Quote context: 5.5 m high interior walls, Hetao Hong Kong Park project
the normalized plastering operation is 40.77m ² per hour
- Flatness and verticality
Exact source text
±3mm/2m
- Plaster
Exact source text
cement plaster
- Travel speed
Exact source text
0.3m/s
- Pressing force
maker headline; against hollow spots
Exact source text
Quote context: maker headline; against hollow spots
30KG Pressure, No Hollowing
- Operator training
Exact source text
operators can master the system after 3–7 days of training
Capabilities and equipment
- Legs
- NoField-level source not recorded
- Wheels
- YesField-level source not recorded
- Tracks
- NoField-level source not recorded
- Level floors
- YesField-level source not recorded
- Rough ground
- Unknown
- Stairs
- Not applicable
- Outdoor use
- Unknown
- Number of arms
- 0Field-level source not recorded
- Hands or end effectors
- ToolField-level source not recorded
- Hands included
- YesField-level source not recorded
- Payload per arm
- Not applicable
- Payload on body or base
- Unknown
- Runtime
- Unknown
- IP rating
- Unknown
- SDK / development interface
- Unknown
Operating conditions and configuration notes
- AGV chassis with four waterproof, mortar-resistant omnidirectional steering wheels; maker says it is unaffected by mortar on the floor, standing water or uneven ground. Motors are IP66 (whole robot not rated).
- Pumps, applies, presses and closes the plaster in one step with a double-scraper trowel head; 3D camera visual servoing and auto-levelling (verticality ±0.015°, joint accuracy ±1 mm).
- Autonomous travel between positions with obstacle recognition; workers finish corners and irregular areas.
- The product text calls the high-wall model PMC-6000iE, the spec table PMC-6000iC.
Still missing for WEIBUILD PMC-6000iC Plastering Robot
Payload · Runtime · IP rating · Rough ground · Outdoor use · SDK / development interface
Background sources for the capability record
These sources are attached to the record as a whole. Only a source displayed beside a value is linked to that field.
- Plastering Robot (PMC-3000iE, PMC-6000iC) ↗Manufacturer source · checked
More detail
Evidence profileShowHide
Robot evidence profile
CheckedEvidence for each configuration
Claims, demonstrations, pilots and deployments describe different levels of evidence. A demonstration does not establish working-site readiness.
WEIBUILD PMC-6000iC Plastering Robot1 deployment · 5 missing capability fields
Configuration: high-wall plastering robot, 5.4 m
- Deployment
Plastered 5.5 m high interior walls of a lab and apartment complex (construction area 30,000 m²) at 40.77 m²/h
Hong Kong Park, Hetao Shenzhen-Hong Kong Science and Technology Innovation Cooperation Zone · 2026-11
Maker case report names its 'high wall plastering robot'. Cement plaster, not gypsum.
Shanghai WEIBUILD Technology Co., Ltd. ↗ · Manufacturer source · checked
What is still missing
Payload · Runtime · IP rating · Rough ground · Outdoor use
- Can it apply gypsum plaster, the usual German interior machine plaster? The maker lists cement plaster only.
- Weight, power supply and runtime are not stated.
- CE declaration and notified body; any European dealer (maker says it is expanding into Europe).
- Price.
Sources
3 pages- Plastering Robot (PMC-3000iE, PMC-6000iC) ↗Shanghai WEIBUILD Technology Co., Ltd. · manufacturer · checked 2026-11-18
- Project Case: Weijian High Wall Plastering Robot - Hong Kong Park, Hetao (16 November 2026) ↗Shanghai WEIBUILD Technology Co., Ltd. · manufacturer · checked 2026-11-18
- Weijian Robotics has obtained EU CE certification (13 October 2026) ↗Shanghai WEIBUILD Technology Co., Ltd. · manufacturer · checked 2026-11-18