sitebots
Job-specific robotAvailable to order

Shimizu Robo-Welder

by Shimizu Corporation · JP

A column welding robot on a wheeled carriage that scans the weld groove with a laser and fills it automatically with a six-axis arm and MAG welding torch; usually two work as a pair on one steel column, on Shimizu's own sites.

Robo-Welder welding a steel column at the Toranomon-Azabudai site, shown with a weld layer drawing
Photo · From shimz.co.jpNo redistributable 3D model

Buy in Germany

checked 2026-10-05

Sellers, prices and stock as their pages showed them. No enquiry is sent from this site.

Not sold hereNot sold in Germany

Not sold: Shimizu developed Robo-Welder (with Osaka University) for its own steel-frame projects in Japan and plans to reuse each robot across its sites; no sale, rental or licence offer found.

Checked 2026-10-05. Maker’s page ↗

Key facts

All specifications
Moves on

Wheels

Height
Not published
Weight
Arms

1

Hands

Process tool

Payload per arm

10 kg

maximum transport capacity of the arm (2018 spec)

Maker · shimz.co.jp ↗
Carry on body
Not published
Runtime
Not published
Max speed
Not published
Stairs
Not published
Outdoors
Not published
IP rating
Not published

Jobs

Specs fit 2

  • Fit and tack-weld end plates, cleats and stiffeners to beamsSteel fabrication shop
  • Weld shear studs onto steel beams on siteSteelwork

Where it has worked

20182019202020212018-04 · Shown in a demo · Welded steel column joints with grooves of varying shape during trials · Robot laboratory, Shimizu Institute of Technology, Etchujima, Tokyo, Japan2021-02 · In daily use · Welded the 100 mm thick plates of the steel columns on the underground floors in 5 man-days per column instead of 8 for master welders; 14 robots planned for the above-ground floors to weld about 15% of around 1,800 km of welds · Toranomon-Azabudai Project, A district (64-storey tower), Minato-ku, Tokyo, Japan; Shimizu as contractor
In daily useShown in a demo
  • Shown in a demo

    Welded steel column joints with grooves of varying shape during trials · Robot laboratory, Shimizu Institute of Technology, Etchujima, Tokyo, Japan · 2018-04

    Shimizu Corporation ↗
  • In daily use

    Welded the 100 mm thick plates of the steel columns on the underground floors in 5 man-days per column instead of 8 for master welders; 14 robots planned for the above-ground floors to weld about 15% of around 1,800 km of welds · Toranomon-Azabudai Project, A district (64-storey tower), Minato-ku, Tokyo, Japan; Shimizu as contractor · 2021-02

    Shimizu Corporation ↗

Specifications

10 values

Specifications by configuration

1 configuration

What each version's maker or seller states, with the exact source text. A source label says who makes the claim, not that it is proven; unknown means not published.

Shimizu Robo-Welder10 specifications · 6 research gaps · reviewed Per arm 10 kgShow all 10 specifications and capabilities
Length x width x height
2,048 x 640 x 1,875 mmManufacturer sourceShimizu Corporation ↗ · checked

2018 spec

Weight
400 kgManufacturer sourceShimizu Corporation ↗ · checked

2018 spec

Arm axes
6Manufacturer sourceShimizu Corporation ↗ · checked

one arm per robot

Arm payload
10 kgManufacturer sourceShimizu Corporation ↗ · checked

maximum transport capacity of the arm (2018 spec)

Arm reach
1101 mmManufacturer sourceShimizu Corporation ↗ · checked

maximum, 2018 spec table; a Shimizu diagram on the topic page shows 901 mm

Repeat accuracy
±0.03 mmManufacturer sourceShimizu Corporation ↗ · checked

2018 spec

Welding method
MAG pulse arc weldingManufacturer sourceShimizu Corporation ↗ · checked

2018 spec

Welding wire diameter
1.2 mmManufacturer sourceShimizu Corporation ↗ · checked

approximately (2021 release)

Groove sensor
blue semiconductor laser, 405 nm, measuring range 200 mm ±48 mmManufacturer sourceShimizu Corporation ↗ · checked

2018 spec

Thickest plate welded on site
100 mmManufacturer sourceShimizu Corporation ↗ · checked

steel column plates at Toranomon-Azabudai, 2021

Capabilities and equipment

Legs
NoField-level source not recorded
Wheels
YesField-level source not recorded
Tracks
NoField-level source not recorded
Level floors
YesField-level source not recorded
Rough ground
Unknown
Stairs
Not applicable
Outdoor use
Unknown
Number of arms
1Field-level source not recorded
Hands or end effectors
ToolField-level source not recorded
Hands included
YesField-level source not recorded
Payload on body or base
Unknown
Runtime
Unknown
IP rating
Unknown
SDK / development interface
Unknown

Operating conditions and configuration notes

  • Sits on a dedicated wheeled carriage that is guided to the column; from there it welds automatically without a worker.
  • One six-axis arm per robot (the English 2021 release says "six arms", the Japanese original says a six-axis arm); two robots usually weld one column from opposite sides.
  • Plans each weld from the laser-measured groove shape with a simulator developed with Osaka University.
  • Specifications are from 2018; the robot shown on site in 2021 looks different (blue arm instead of the orange arm in the 2018 photos), so values may have changed.

Still missing for Shimizu Robo-Welder

Payload · Runtime · IP rating · Rough ground · Outdoor use · SDK / development interface

Background sources for the capability record

These sources are attached to the record as a whole. Only a source displayed beside a value is linked to that field.

More detail

Evidence profileShow

Robot evidence profile

Checked

Evidence for each configuration

Claims, demonstrations, pilots and deployments describe different levels of evidence. A demonstration does not establish working-site readiness.

Shimizu Robo-Welder1 demonstration · 1 deployment · 5 missing capability fields
  1. Demonstration

    Welded steel column joints with grooves of varying shape during trials

    Robot laboratory, Shimizu Institute of Technology, Etchujima, Tokyo, Japan · 2018-04

    Shimizu Corporation ↗ · Manufacturer source · checked

  2. Deployment

    Welded the 100 mm thick plates of the steel columns on the underground floors in 5 man-days per column instead of 8 for master welders; 14 robots planned for the above-ground floors to weld about 15% of around 1,800 km of welds

    Toranomon-Azabudai Project, A district (64-storey tower), Minato-ku, Tokyo, Japan; Shimizu as contractor · 2021-02

    Shimizu Corporation ↗ · Manufacturer source · checked

What is still missing

Payload · Runtime · IP rating · Rough ground · Outdoor use

  • Is Robo-Welder still in use on Shimizu sites after Toranomon-Azabudai, and how many robots exist?
  • Current specifications: the 2018 table and a Shimizu diagram disagree on arm reach (1,101 vs 901 mm) and arm weight (54 vs 52 kg).
View configuration specifications and source text

Sources

5 pages