sitebots
Job-specific robotPilot only

Shimizu Robo-Buddy Ceiling

by Shimizu Corporation · JP · Configuration: Ceiling (ceiling board installation)

A two-armed autonomous robot that drives to its work position using the BIM model, lifts a plasterboard to the ceiling frame with one arm and screws it on with the other; built by Shimizu for its own sites.

Shimizu Robo-Buddy with two orange robot arms installing a ceiling board in the robot laboratory
Photo · From shimz.co.jpNo redistributable 3D model

Buy in Germany

checked 2026-10-05

Sellers, prices and stock as their pages showed them. No enquiry is sent from this site.

Not sold hereNot sold in Germany

Not sold: Shimizu developed Robo-Buddy for its own building sites in Japan and plans to reuse each robot across two to three of its sites; no sale, rental or licence offer found.

Checked 2026-10-05. Maker’s page ↗

Key facts

All specifications
Moves on

Wheels

Height
Not published
Weight

1,600 kg

2018 spec

Maker · shimz.co.jp ↗
Arms

2

Hands

Process tool

Payload per arm
Not published
Carry on body
Not published
Runtime
Not published
Max speed
Not published
Stairs
Not published
Outdoors
Not published
IP rating
Not published

Jobs

Tested in a pilot 1

  • Lift and fix plasterboard to walls and ceilingsTested in a pilot · Shimizu building site in Japan (not named)

Made for this work 1

  • Hang the substructure of a suspended plasterboard ceilingMade for this work

Where it has worked

20172018201920202021202220232017-07 · Made for this work · Inserts ceiling hanger bolts, assembles the ceiling substructure, fixes ceiling boards with screws and lays raised floor pedestals and panels2018-04 · Shown in a demo · Lifted ceiling boards to the ceiling frame and screwed them on during trials · Robot laboratory, Shimizu Institute of Technology, Etchujima, Tokyo, Japan2023-03 · Tested in a pilot · Fixed about 100 ceiling boards on a real building site with a 100% success rate · Shimizu building site in Japan (not named)
Tested in a pilotShown in a demoMade for this work
  • Made for this work

    Inserts ceiling hanger bolts, assembles the ceiling substructure, fixes ceiling boards with screws and lays raised floor pedestals and panels · 2017-07

    Maker statement at the launch of the Shimz Smart Site system.

    Shimizu Corporation ↗
  • Shown in a demo

    Lifted ceiling boards to the ceiling frame and screwed them on during trials · Robot laboratory, Shimizu Institute of Technology, Etchujima, Tokyo, Japan · 2018-04

    Shimizu Corporation ↗
  • Tested in a pilot

    Fixed about 100 ceiling boards on a real building site with a 100% success rate · Shimizu building site in Japan (not named) · 2023-03

    Nikkei Robotics (November 2023): development is complete; the robot is kept at a research site in Tokyo and can be sent to other sites.

    Nikkei Robotics ↗

Specifications

11 values

Specifications by configuration

1 configuration

What each version's maker or seller states, with the exact source text. A source label says who makes the claim, not that it is proven; unknown means not published.

Shimizu Robo-Buddy CeilingCeiling (ceiling board installation)11 specifications · 8 research gaps · reviewed Show all 11 specifications and capabilities
Length x width x height
2,261 x 800 x 2,075 mmManufacturer sourceShimizu Corporation ↗ · checked

width 2,510 mm with outriggers extended (2018 spec)

Weight
1600 kgManufacturer sourceShimizu Corporation ↗ · checked

2018 spec

Axes per arm
6Manufacturer sourceShimizu Corporation ↗ · checked

two arms

Gripping capacity
30 kgManufacturer sourceShimizu Corporation ↗ · checked

robot section (2018 spec); whether per arm or for both arms is not stated

Maximum work height
4470 mmManufacturer sourceShimizu Corporation ↗ · checked

2018 spec

Maximum operating radius
1610 mmManufacturer sourceShimizu Corporation ↗ · checked

2018 spec

Step it can cross
20 cmManufacturer sourceShimizu Corporation ↗ · checked

maker statement in 2017 (special step-climbing function)

Sensors
camera, 2D laser displacement gauge, force sensorManufacturer sourceShimizu Corporation ↗ · checked

2018 spec

Self-localisation
2D-LiDARReported · otherIEEE ↗ · checked

Robo-Buddy Ceiling, 2023

End effectors
vacuum pads to hold the plasterboard; laser sensor and screwdriver on the other armReported · otherIEEE ↗ · checked

Robo-Buddy Ceiling, 2023

Power
Li-ion batteryManufacturer sourceShimizu Corporation ↗ · checked

2018 spec

Capabilities and equipment

Legs
NoField-level source not recorded
Wheels
YesField-level source not recorded
Tracks
NoField-level source not recorded
Level floors
YesField-level source not recorded
Rough ground
Unknown
Stairs
Not applicable
Outdoor use
Unknown
Number of arms
2Field-level source not recorded
Hands or end effectors
ToolField-level source not recorded
Hands included
YesField-level source not recorded
Payload per arm
Unknown
Payload on body or base
Unknown
Runtime
Unknown
IP rating
Unknown
SDK / development interface
Unknown

Operating conditions and configuration notes

  • An operator sends the task from a tablet; the robot finds its position by matching laser data with the BIM model and drives to the work place on its own.
  • Works from an autonomous wheeled base with outriggers and a lifting platform; the raised-floor version is described as two arms on a four-wheel vehicle.
  • A second robot, Robo-Assist Ceiling, brings the boards; the 2017 release also lists inserting ceiling hanger bolts and assembling the ceiling substructure.
  • End effectors can be swapped; a raised-floor configuration (Robo-Buddy Floor) was trialled on two floors of SHIN-OSAKA DOI BLDG. No5 in September 2021 (not covered by this record).
  • Gripping capacity of 30 kg is not stated per arm, so armPayloadKg is left empty.

Still missing for Shimizu Robo-Buddy Ceiling

Payload per arm · Payload, both arms · Payload · Runtime · IP rating · Rough ground · Outdoor use · SDK / development interface

Background sources for the capability record

These sources are attached to the record as a whole. Only a source displayed beside a value is linked to that field.

More detail

Evidence profileShow

Robot evidence profile

Checked

Evidence for each configuration

Claims, demonstrations, pilots and deployments describe different levels of evidence. A demonstration does not establish working-site readiness.

Shimizu Robo-Buddy Ceiling1 published claim · 1 demonstration · 1 pilot · 7 missing capability fields

Configuration: Ceiling (ceiling board installation)

  1. Published claim

    Inserts ceiling hanger bolts, assembles the ceiling substructure, fixes ceiling boards with screws and lays raised floor pedestals and panels

    Location not recorded · 2017-07

    Maker statement at the launch of the Shimz Smart Site system.

    Shimizu Corporation ↗ · Manufacturer source · checked

  2. Demonstration

    Lifted ceiling boards to the ceiling frame and screwed them on during trials

    Robot laboratory, Shimizu Institute of Technology, Etchujima, Tokyo, Japan · 2018-04

    Shimizu Corporation ↗ · Manufacturer source · checked

  3. Pilot

    Fixed about 100 ceiling boards on a real building site with a 100% success rate

    Shimizu building site in Japan (not named) · 2023-03

    Nikkei Robotics (November 2023): development is complete; the robot is kept at a research site in Tokyo and can be sent to other sites.

    Nikkei Robotics ↗ · Reported · press · checked

What is still missing

Payload per arm · Payload, both arms · Payload · Runtime · IP rating · Rough ground · Outdoor use

  • Has Robo-Buddy Ceiling been used on sites after the March 2023 application, and which ones?
  • Specifications of the 2023 Ceiling version (the published table is from 2018); runtime per battery.
  • Is the 30 kg gripping capacity per arm?
View configuration specifications and source text

Sources

6 pages