Buy in Germany
checked 2026-11-18Sellers, prices and stock as their pages showed them. No enquiry is sent from this site.
No German or EU sales route found. LAYERED says a first series is in production and a commercial deployment phase starts in Switzerland in September 2026; it has run paid proofs of concept with a French general contractor and a first French site deployment (June 2026). Contact via the Swiss maker only.
Checked 2026-11-18. Maker’s page ↗
Key facts
All specifications- Moves on
Wheels
- Height
- Not published
- Weight
120 kg
Maker · layered.ch ↗- Arms
1
- Hands
Process tool
- Payload per arm
- Not published
- Carry on body
- Not published
- Runtime
- Not published
- Max speed
- Not published
- Stairs
- Not published
- Outdoors
- Not published
- IP rating
- Not published
Jobs
Tested in a pilot 1
- Spray and level machine-applied gypsum plasterTested in a pilot · Groupe Egli, Wangen bei Olten, and Tip Top Gipsergeschäft AG, Egnach, Switzerland
Did similar work 2
- Apply EIFS facade panels and render in the plantDid similar work · Plaster application on two live construction sites
- Paint walls and ceilingsDid similar work · Plaster application on two live construction sites
Specs fit 3
- Apply bitumen thick coating (PMBC) to basement wallsWaterproofing
- Apply the base coat and embed the reinforcing meshExternal insulation and render systems (ETICS)
- Mix and apply repair mortar to prepared areasConcrete repair
Where it has worked
- Tested in a pilot
Plaster application on two live construction sites · Groupe Egli, Wangen bei Olten, and Tip Top Gipsergeschäft AG, Egnach, Switzerland · 2025-10
Funder places the system at TRL 7.
Gebert Rüf Stiftung ↗ - Tested in a pilot
First site deployment in France after paid proofs of concept with construction product makers and a French general contractor · France · 2026-06
Site and trade not named.
Gebert Rüf Stiftung ↗
Specifications
5 valuesSpecifications by configuration
1 configurationWhat each version's maker or seller states, with the exact source text. A source label says who makes the claim, not that it is proven; unknown means not published.
LAYERED autonomous plastering robot5 specifications · 7 research gaps · reviewed Show all 5 specifications and capabilities
- Weight
Exact source text
Weight120kg
- Speed
maker claim
Exact source text
Quote context: maker claim
Speed2x faster
- Material savings
maker claim
Exact source text
Quote context: maker claim
Material savings20%
- Process
- spray-based printing-in-motion of plaster or coatings, planned autonomouslyManufacturer sourceLAYERED GmbH ↗ · checked
Exact source text
Our robot autonomously plans and executes spray-based printing-in-motion—the first of its kind in the industry.
- Operation
Exact source text
controlled through an intuitive XR interface on a standard iPhone
Capabilities and equipment
- Legs
- NoField-level source not recorded
- Wheels
- YesField-level source not recorded
- Tracks
- NoField-level source not recorded
- Level floors
- YesField-level source not recorded
- Rough ground
- Unknown
- Stairs
- Not applicable
- Outdoor use
- Unknown
- Number of arms
- 1Field-level source not recorded
- Hands or end effectors
- ToolField-level source not recorded
- Hands included
- YesField-level source not recorded
- Payload per arm
- Unknown
- Payload on body or base
- Unknown
- Runtime
- Unknown
- IP rating
- Unknown
- SDK / development interface
- Unknown
Operating conditions and configuration notes
- The robot scans the wall; the worker picks the surfaces to treat in a simple interface; the robot then applies plaster or coating (CEO profile).
- Mobile base with one spray arm assumed from the description of a light mobile robot; drive type not stated.
- Also tested for facade upgrading in a proof of concept for the European Commission JRC in Ispra, Italy (funder page).
Still missing for LAYERED autonomous plastering robot
Payload per arm · Payload · Runtime · IP rating · Rough ground · Outdoor use · SDK / development interface
Background sources for the capability record
These sources are attached to the record as a whole. Only a source displayed beside a value is linked to that field.
- LAYERED: Smart surface coating for the future of construction ↗Manufacturer source · checked
- LAYERED – Advanced construction robots for autonomous surface finishing (project page) ↗Reported · other · checked
- Eliott Sounigo, CEO of LAYERED GmbH, Lupfig (AG): Mobile robots for automated surface finishing on construction sites ↗Reported · other · checked
More detail
Evidence profileShowHide
Robot evidence profile
CheckedEvidence for each configuration
Claims, demonstrations, pilots and deployments describe different levels of evidence. A demonstration does not establish working-site readiness.
LAYERED autonomous plastering robot2 pilots · 6 missing capability fields
- Pilot
Plaster application on two live construction sites
Groupe Egli, Wangen bei Olten, and Tip Top Gipsergeschäft AG, Egnach, Switzerland · 2025-10
Funder places the system at TRL 7.
Gebert Rüf Stiftung ↗ · Reported · other · checked
- Pilot
First site deployment in France after paid proofs of concept with construction product makers and a French general contractor
France · 2026-06
Site and trade not named.
Gebert Rüf Stiftung ↗ · Reported · other · checked
What is still missing
Payload per arm · Payload · Runtime · IP rating · Rough ground · Outdoor use
- Price, rental model and whether LAYERED serves Germany are not stated.
- Spray height, output in m²/h, tank or pump set-up and battery runtime are not published.
- Which plaster and coating materials are approved?
Sources
3 pages- LAYERED: Smart surface coating for the future of construction ↗LAYERED GmbH · manufacturer · checked 2026-11-18
- LAYERED – Advanced construction robots for autonomous surface finishing (project page) ↗Gebert Rüf Stiftung · other · checked 2026-11-18
- Eliott Sounigo, CEO of LAYERED GmbH, Lupfig (AG): Mobile robots for automated surface finishing on construction sites ↗W.A. de Vigier Stiftung · other · checked 2026-11-18