
Buy in Germany
checked 2026-10-02Sellers, prices and stock as their pages showed them. No enquiry is sent from this site.
Made by KEWAZO GmbH in Garching near Munich; sold on request via the maker's quote form. Pilot test units are available in Europe. No public price.
KEWAZO GmbH DE · manufacturer
Checked 2026-10-02. Maker’s page ↗
Key facts
All specifications- Moves on
- Not published
- Height
- Not published
- Weight
- Not published
- Arms
None
- Hands
No hands
- Payload per arm
Not applicable
- Carry on body
100 kg
per lift, maximum ('up to'); stated 01.11.2022 by customer Techint E&C, which adds that KEWAZO was working to raise it; KEWAZO's own pages give no per-lift load, so check the current datasheet
Reported · techint.com ↗- Runtime
- Max speed
- Not published
- Stairs
No
- Outdoors
Yes
- IP rating
- Not published
Jobs
Specs fit 5
- Dismantle the frame scaffold and stack the partsScaffolding
- Erect a frame facade scaffold and anchor it to the buildingScaffolding
- Lift and fix large fibre-cement facade panelsRainscreen facades
- Set and fix rafters on the roof structureCarpentry and timber construction
- Set concrete kerbsRoads, paths and paving
Where it has worked
- In daily use
Moved scaffold parts during dismantling of a 52 m flare scaffold in an ATEX zone (assembly had been done by crane), plus ventilation, steel and electrical material; 30% fewer man-hours · BASF, Ludwigshafen, Germany · 2024-10
Industrial scaffold on a flare, not a facade scaffold.
KEWAZO GmbH ↗ - Made for this work
Moves scaffold parts, insulation, paint, piping and electrical material vertically
KEWAZO GmbH ↗
Specifications
12 valuesSpecifications by configuration
1 configurationWhat each version's maker or seller states, with the exact source text. A source label says who makes the claim, not that it is proven; unknown means not published.
KEWAZO LIFTBOT12 specifications · 3 research gaps · reviewed Body / base payload 100 kgRuntime 10 hShow all 12 specifications and capabilities
- Lifting speed
- Throughput
on average per 8-hour shift with 3 people
- Working height
certified; higher on site-specific assessment
- Maximum wind speed
- Runtime
product page; FAQ gives 8-10 h under heavy use
- Charging time
regular 110/230 V outlet; FAQ gives 2-3 h
- Swappable battery
- Setup time
done by the crew; no access bay or extra anchors needed
- Footprint
- Certification
- Scaffold systems
- Layher, Ringlock, Cuplock, Safway, PeriUp, Kwikstage, Turner, frame and brace, tube and clampManufacturer sourceKEWAZO GmbH ↗ · checked
- Payload
per lift, maximum ('up to'); stated 01.11.2022 by customer Techint E&C, which adds that KEWAZO was working to raise it; KEWAZO's own pages give no per-lift load, so check the current datasheet
Exact source text
Quote context: per lift, maximum ('up to'); stated 01.11.2022 by customer Techint E&C, which adds that KEWAZO was working to raise it; KEWAZO's own pages give no per-lift load, so check the current datasheet
Liftbot currently has a load capacity of up to 100 kg, but the supplier is working to increase this to meet specific client demands.
Capabilities and equipment
- Legs
- NoField-level source not recorded
- Wheels
- NoField-level source not recorded
- Tracks
- NoField-level source not recorded
- Level floors
- NoField-level source not recorded
- Rough ground
- Unknown
- Stairs
- NoField-level source not recorded
- Outdoor use
- YesField-level source not recorded
- Number of arms
- 0Field-level source not recorded
- Hands or end effectors
- NoneField-level source not recorded
- Hands included
- Not applicable
- Payload per arm
- Not applicable
- IP rating
- Unknown
- SDK / development interface
- Unknown
Operating conditions and configuration notes
- Moves only along its rail on the scaffold or structure; it does not drive on the ground.
- Runs automatically between levels without an active operator; swappable platforms for scaffold parts or general material.
- Payload of a single lift is not published; the 6,000 kg figure is per shift.
- Not ATEX certified; hazardous sites only after risk assessment.
- Not approved for lifting people.
Still missing for KEWAZO LIFTBOT
IP rating · Rough ground · SDK / development interface
Background sources for the capability record
These sources are attached to the record as a whole. Only a source displayed beside a value is linked to that field.
- LIFTBOT product page ↗Manufacturer source · checked
- FAQ ↗Manufacturer source · checked
- Liftbot, help at height ↗Reported · press · checked
More detail
Evidence profileShowHide
Robot evidence profile
CheckedEvidence for each configuration
Claims, demonstrations, pilots and deployments describe different levels of evidence. A demonstration does not establish working-site readiness.
KEWAZO LIFTBOT1 published claim · 1 deployment · 2 missing capability fields
- Deployment
Moved scaffold parts during dismantling of a 52 m flare scaffold in an ATEX zone (assembly had been done by crane), plus ventilation, steel and electrical material; 30% fewer man-hours
BASF, Ludwigshafen, Germany · 2024-10
Industrial scaffold on a flare, not a facade scaffold.
KEWAZO GmbH ↗ · Manufacturer source · checked
- Published claim
Moves scaffold parts, insulation, paint, piping and electrical material vertically
Location not recorded · Event date not recorded
KEWAZO GmbH ↗ · Manufacturer source · checked
What is still missing
IP rating · Rough ground
- Maximum load per lift.
- Purchase or rental price.
- Robot and rail weights.
Sources
5 pages- LIFTBOT product page ↗KEWAZO GmbH · manufacturer · checked 2026-10-02
- FAQ ↗KEWAZO GmbH · manufacturer · checked 2026-10-02
- Legal notice ↗KEWAZO GmbH · manufacturer · checked 2026-10-02
- LIFTBOT replaced a crane at BASF ↗KEWAZO GmbH · manufacturer · checked 2026-10-02
- Liftbot, help at height ↗Techint E&C · press · checked 2026-10-20