Buy in Germany
checked 2026-11-18Sellers, prices and stock as their pages showed them. No enquiry is sent from this site.
Sold only in Japan: open price on request, with lease, rental, test use on site and a dealer scheme for rental and leasing firms, all through the Japanese maker. No German or EU distributor or CE information found.
Checked 2026-11-18. Maker’s page ↗
Key facts
All specifications- Moves on
Wheels
- Height
- Not published
- Weight
- Arms
None
- Hands
Process tool, not included
- Payload per arm
Not applicable
- Carry on body
- Not published
- Runtime
12 h
200 mm spacing, two tying tools, full battery, 25 °C; charging takes 6 h
Maker · kenrobo-tech.com ↗- Max speed
- Not published
- Stairs
- Not published
- Outdoors
Yes
- IP rating
- Not published
Jobs
In daily use 1
- Tie rebar crossings on slab and deck matsIn daily use · Japan: user list names Kajima, Takenaka, Shimizu, Nishimatsu, Tokyu Construction, Sumitomo Mitsui Construction, Daiwa House and regional rebar firms
Specs fit 1
- Tie reinforcement cages for columns and beamsRebar cage and formwork preparation
Where it has worked
- In daily use
Ties rebar crossings of slabs and ground slabs instead of rebar workers · Japan: user list names Kajima, Takenaka, Shimizu, Nishimatsu, Tokyu Construction, Sumitomo Mitsui Construction, Daiwa House and regional rebar firms
Maker's list of companies using the Tomorobo series; projects are not named.
Kenrobotech Co., Ltd. ↗
Specifications
9 valuesSpecifications by configuration
1 configurationWhat each version's maker or seller states, with the exact source text. A source label says who makes the claim, not that it is proven; unknown means not published.
Kenrobotech Rebar-tying Tomorobo RTM1-X1-A1standard, for D10–D16 bars9 specifications · 4 research gaps · reviewed Runtime 12 hShow all 9 specifications and capabilities
- Bar diameters
may not tie where three φ16 bars cross; heavy-bar version RTM1-X1-A2 covers φ16-φ32
Exact source text
Quote context: may not tie where three φ16 bars cross; heavy-bar version RTM1-X1-A2 covers φ16–φ32
対象鉄筋径はφ10、φ13、φ16※1に対応
- Bar spacing
spacing tolerance ±20 mm
Exact source text
Quote context: spacing tolerance ±20 mm
配筋ピッチは100~300mm内で25mmごとに対応。
- Tying cycle
per crossing, 200 mm spacing, two tying tools
Exact source text
Quote context: per crossing, 200 mm spacing, two tying tools
2.7s(200mmピッチ、結束機2台使用時1カ所当り)
- Runtime per charge
200 mm spacing, two tying tools, full battery, 25 °C; charging takes 6 h
Exact source text
Quote context: 200 mm spacing, two tying tools, full battery, 25 °C; charging takes 6 h
12時間(200mmピッチ、結束機2台使用、バッテリーフル充電時 環境温度25度の場合)
- Weight
without tying tools
Exact source text
Quote context: without tying tools
38.5kg(結束機は含みません)
- Dimensions L × W × H
width adjustable; detachable sensor not included
Exact source text
Quote context: width adjustable; detachable sensor not included
L69 W63~93(可変式) H60
- Tying patterns
Exact source text
全結束、チドリ結束、2つ飛び結束
- Operating conditions
- 0 to 40 °C, 0 to 80 % humidity, not in rain or snowManufacturer sourceKenrobotech Co., Ltd. ↗ · checked
rain cover sold as accessory
Exact source text
Quote context: rain cover sold as accessory
温度/0℃~40℃、湿度/0%~80% ※雨天、降雪時は使用できません。
- Tying tool
sold with or without the tools; tie wire refill about every 40 min
Exact source text
Quote context: sold with or without the tools; tie wire refill about every 40 min
鉄筋結束トモロボ(RTM1-X1-A1)はRB440Tに対応しており
Capabilities and equipment
- Legs
- NoField-level source not recorded
- Wheels
- YesField-level source not recorded
- Tracks
- NoField-level source not recorded
- Level floors
- NoField-level source not recorded
- Rough ground
- Unknown
- Stairs
- Not applicable
- Outdoor use
- YesField-level source not recorded
- Number of arms
- 0Field-level source not recorded
- Hands or end effectors
- ToolField-level source not recorded
- Hands included
- NoField-level source not recorded
- Payload per arm
- Not applicable
- Payload on body or base
- Unknown
- IP rating
- Unknown
- SDK / development interface
- Unknown
Operating conditions and configuration notes
- Travels on its own along the rebar mesh (one way or back and forth); the maker speaks of a vehicle body but does not describe the running gear, so wheels is an assumption from 'travel' wording.
- Senses bar crossings with width and rebar sensors and adapts to spacing changes, height offsets and tilt.
- Three safety sensors: low body sensor, high sensor for people, bar-end sensor.
- The base unit is sold without the MAX tying tools unless the set with two tools is bought, so handsIncluded is false.
- Registered in Japan's NETIS technology database (SK-200003-A); a slider set for automatic sideways moves has been available since February 2022.
Still missing for Kenrobotech Rebar-tying Tomorobo RTM1-X1-A1
Payload · IP rating · Rough ground · SDK / development interface
Background sources for the capability record
These sources are attached to the record as a whole. Only a source displayed beside a value is linked to that field.
- 鉄筋結束トモロボ 製品詳細・仕様 (product details and specifications) ↗Manufacturer source · checked
- トモロボ FAQ (price, lease, rental, tools) ↗Manufacturer source · checked
More detail
Evidence profileShowHide
Robot evidence profile
CheckedEvidence for each configuration
Claims, demonstrations, pilots and deployments describe different levels of evidence. A demonstration does not establish working-site readiness.
Kenrobotech Rebar-tying Tomorobo RTM1-X1-A11 deployment · 3 missing capability fields
Configuration: standard, for D10–D16 bars
- Deployment
Ties rebar crossings of slabs and ground slabs instead of rebar workers
Japan: user list names Kajima, Takenaka, Shimizu, Nishimatsu, Tokyu Construction, Sumitomo Mitsui Construction, Daiwa House and regional rebar firms · Event date not recorded
Maker's list of companies using the Tomorobo series; projects are not named.
Kenrobotech Co., Ltd. ↗ · Manufacturer source · checked
What is still missing
Payload · IP rating · Rough ground
- Price: the maker lists an open price on request; no figure on the pages read.
- Is there any export, CE marking or European partner?
- Running gear on the rebar mesh is not described in text.
Sources
3 pages- 鉄筋結束トモロボ 製品詳細・仕様 (product details and specifications) ↗Kenrobotech Co., Ltd. · manufacturer · checked 2026-11-18
- トモロボ FAQ (price, lease, rental, tools) ↗Kenrobotech Co., Ltd. · manufacturer · checked 2026-11-18
- トモロボ導入企業 (companies using Tomorobo) ↗Kenrobotech Co., Ltd. · manufacturer · checked 2026-11-18