sitebots
Job-specific robotAvailable to order

INSTATIQ P1 (Progress One)

by INSTATIQ GmbH · DE · Configuration: Progress One

Mobile 3D concrete printer with a 26 m automatically controlled boom that prints load-bearing walls on site from standard ready-mix concrete. Made by INSTATIQ, a Putzmeister spin-off near Stuttgart, and used on German and Austrian building sites.

Rendering of the INSTATIQ P1 printing walls with its boom
Photo · From instatiq.comNo redistributable 3D model

Buy in Germany

checked 2026-11-18

Sellers, prices and stock as their pages showed them. No enquiry is sent from this site.

Price on requestOrder on request

Offered in Germany by the Stuttgart maker as a printing service: INSTATIQ works as technology partner for the printing, helps integrate it into existing building processes or delivers the complete automated shell; first consultation on request. Printing services are also sold through NELCON, a joint venture of STRABAG and INSTATIQ. No machine sale or price is shown on the pages read.

Checked 2026-11-18. Maker’s page ↗

Key facts

All specifications
Moves on
Not published
Height
Not published
Weight
Not published
Arms

1

Hands

Process tool

Payload per arm
Not published
Carry on body
Not published
Runtime
Not published
Max speed
Not published
Stairs
Not published
Outdoors

Yes

IP rating
Not published

Jobs

No job on the map fits this robot yet.

Where it has worked

2024202520262025-07 · In daily use · Printed the load-bearing walls of the top floor of a four-storey apartment building directly on site in four days · GWG Reutlingen housing, Metzingen-Neugreuth, Germany – ZÜBLIN2026-06 · In daily use · Printed more than 1,300 m² of wall with walls up to 7 m high for a supermarket; two P1 printers worked in parallel in some phases · Neubulach, Germany – NELCON, Heidelberg Materials, Köhler Bauunternehmung Wildberg2026-07 · In daily use · Printing about 890 m² of walls in two thicknesses (17.5 and 24 cm) for an office and warehouse building · Detmold, Germany – AS-Bau, NELCON2026-11 · In daily use · Printing about 682 m² of load-bearing walls from about 179 m³ of concrete for a four-storey headquarters building · Weerberg, Tyrol, Austria – NELCON and STRABAG
In daily use
  • In daily use

    Printed the load-bearing walls of the top floor of a four-storey apartment building directly on site in four days · GWG Reutlingen housing, Metzingen-Neugreuth, Germany – ZÜBLIN · 2025-07

    The projects page later says the walls of the top two storeys were printed.

    STRABAG SE ↗
  • In daily use

    Printed more than 1,300 m² of wall with walls up to 7 m high for a supermarket; two P1 printers worked in parallel in some phases · Neubulach, Germany – NELCON, Heidelberg Materials, Köhler Bauunternehmung Wildberg · 2026-06

    INSTATIQ GmbH ↗
  • In daily use

    Printing about 890 m² of walls in two thicknesses (17.5 and 24 cm) for an office and warehouse building · Detmold, Germany – AS-Bau, NELCON · 2026-07

    INSTATIQ GmbH ↗
  • In daily use

    Printing about 682 m² of load-bearing walls from about 179 m³ of concrete for a four-storey headquarters building · Weerberg, Tyrol, Austria – NELCON and STRABAG · 2026-11

    Printing planned to finish in January 2027, building in March 2027.

    INSTATIQ GmbH ↗

Specifications

9 values

Specifications by configuration

1 configuration

What each version's maker or seller states, with the exact source text. A source label says who makes the claim, not that it is proven; unknown means not published.

INSTATIQ P1 (Progress One)Progress One9 specifications · 6 research gaps · reviewed Show all 9 specifications and capabilities
Boom reach
26 mManufacturer sourceINSTATIQ GmbH ↗ · checked
Exact source text
der Reichweite unseres Roboters von bis zu 26 Metern
Printing speed
10 cm/sManufacturer sourceINSTATIQ GmbH ↗ · checked

up to

Exact source text

Quote context: up to

DRUCKGESCHWINDIGKEIT – bis zu 10 cm/s
Wall thickness
8 to 40 cmManufacturer sourceINSTATIQ GmbH ↗ · checked
Exact source text
DRUCKBREITE – Wandstärken von 8 bis 40 cm, echte Massivbauweise
Concrete output
2.5 m³/hReported · customerSTRABAG SE ↗ · checked

maximum, Metzingen project

Exact source text

Quote context: maximum, Metzingen project

a maximum output of 2.5 cubic meters per hour
Largest aggregate in the concrete
10 mmManufacturer sourceINSTATIQ GmbH ↗ · checked

standard ready-mix concrete

Exact source text

Quote context: standard ready-mix concrete

aus Standard-Transportbeton mit 10 mm Korngröße
Setup time
60 minManufacturer sourceINSTATIQ GmbH ↗ · checked

maker facts box labelled SETUP-TIME

Exact source text

Quote context: maker facts box labelled SETUP-TIME

60 min
Printed wall height
7 mManufacturer sourceINSTATIQ GmbH ↗ · checked

up to 7 m at the Neubulach supermarket; up to 3 m per storey at Metzingen

Exact source text

Quote context: up to 7 m at the Neubulach supermarket; up to 3 m per storey at Metzingen

Wandhöhen bis sieben Meter
Material
standard ready-mix concrete, no special mortarManufacturer sourceINSTATIQ GmbH ↗ · checked
Exact source text
TRANSPORTBETON – Drucken mit klassischem Beton, kein Spezialmörtel
Drive
fully electric operationManufacturer sourceINSTATIQ GmbH ↗ · checked
Exact source text
Durch den vollelektrischen Betrieb

Capabilities and equipment

Legs
NoField-level source not recorded
Wheels
NoField-level source not recorded
Tracks
NoField-level source not recorded
Level floors
YesField-level source not recorded
Rough ground
Unknown
Stairs
Not applicable
Outdoor use
YesField-level source not recorded
Number of arms
1Field-level source not recorded
Hands or end effectors
ToolField-level source not recorded
Hands included
YesField-level source not recorded
Payload per arm
Unknown
Payload on body or base
Unknown
Runtime
Unknown
IP rating
Unknown
SDK / development interface
Unknown

Operating conditions and configuration notes

  • The arm is a 26 m automatically controlled boom with a print head; the maker compares it with a mobile concrete pump.
  • How the machine is carried and moved between sites (truck or other carrier) is not described on the pages read; wheels and tracks are left false.
  • Prints solid load-bearing walls, not formwork, from concrete delivered by a normal mixer truck.
  • The printer is repositioned between storeys on multi-storey jobs (Weerberg).

Still missing for INSTATIQ P1 (Progress One)

Payload per arm · Payload · Runtime · IP rating · Rough ground · SDK / development interface

Background sources for the capability record

These sources are attached to the record as a whole. Only a source displayed beside a value is linked to that field.

More detail

Evidence profileShow

Robot evidence profile

Checked

Evidence for each configuration

Claims, demonstrations, pilots and deployments describe different levels of evidence. A demonstration does not establish working-site readiness.

INSTATIQ P1 (Progress One)4 deployments · 5 missing capability fields

Configuration: Progress One

  1. Deployment

    Printed the load-bearing walls of the top floor of a four-storey apartment building directly on site in four days

    GWG Reutlingen housing, Metzingen-Neugreuth, Germany – ZÜBLIN · 2025-07

    The projects page later says the walls of the top two storeys were printed.

    STRABAG SE ↗ · Reported · customer · checked

  2. Deployment

    Printed more than 1,300 m² of wall with walls up to 7 m high for a supermarket; two P1 printers worked in parallel in some phases

    Neubulach, Germany – NELCON, Heidelberg Materials, Köhler Bauunternehmung Wildberg · 2026-06

    INSTATIQ GmbH ↗ · Manufacturer source · checked

  3. Deployment

    Printing about 890 m² of walls in two thicknesses (17.5 and 24 cm) for an office and warehouse building

    Detmold, Germany – AS-Bau, NELCON · 2026-07

    INSTATIQ GmbH ↗ · Manufacturer source · checked

  4. Deployment

    Printing about 682 m² of load-bearing walls from about 179 m³ of concrete for a four-storey headquarters building

    Weerberg, Tyrol, Austria – NELCON and STRABAG · 2026-11

    Printing planned to finish in January 2027, building in March 2027.

    INSTATIQ GmbH ↗ · Manufacturer source · checked

What is still missing

Payload per arm · Payload · Runtime · IP rating · Rough ground

  • Can the P1 machine itself be bought or rented, or only printing as a service from INSTATIQ or NELCON? No machine price is published.
  • What carrier does the P1 use (truck chassis or other) and what does it weigh?
  • Crew size needed to run the printer is not stated on the pages read.
  • Launch date: the P1 name and first public showing are not dated on the pages read.
View configuration specifications and source text

Sources

6 pages