sitebots
Job-specific robotAvailable to order

Constructions-3D MiniPrinter XL

by Constructions-3D · FR

Compact gantry 3D concrete printer for the factory: prints precast parts such as columns, partitions and openings on two pallets in turn, up to about 1 t of mortar per hour.

Constructions-3D MiniPrinter XL gantry concrete 3D printer
Photo · From constructions-3d.comNo redistributable 3D model

Buy in Germany

checked 2026-11-18

Sellers, prices and stock as their pages showed them. No enquiry is sent from this site.

from €104,900 netOrder on request

EU maker (France) publishes a euro starting price and an online configurator; order by quote through the configurator or contact form. No German reseller found.

Checked 2026-11-18. Maker’s page ↗

Key facts

All specifications
Moves on
Not published
Height
Not published
Arms

None

Hands

Process tool

Payload per arm

Not applicable

Carry on body
Not published
Runtime
Not published
Max speed
Not published
Stairs
Not published
Outdoors
Not published
IP rating
Not published

Jobs

No job on the map fits this robot yet.

Where it has worked

  • Made for this work

    Prefabricates complex concrete parts for construction sites, such as columns, partitions and openings

    Maker application example; no named project on the page.

    Constructions-3D ↗

Specifications

9 values

Specifications by configuration

1 configuration

What each version's maker or seller states, with the exact source text. A source label says who makes the claim, not that it is proven; unknown means not published.

Constructions-3D MiniPrinter XL9 specifications · 6 research gaps · reviewed Show all 9 specifications and capabilities
Print area
2500 × 1200 × 1200 mmManufacturer sourceConstructions-3D ↗ · checked
Exact source text
PrintArea2500x1200x1200 mm
Maximum travel speed
400 mm/sManufacturer sourceConstructions-3D ↗ · checked
Exact source text
400mm/sMaximum travel speed.
Repeatability
< 1 mmManufacturer sourceConstructions-3D ↗ · checked
Exact source text
Repeatability level< 1 mm
Weight
515 kgManufacturer sourceConstructions-3D ↗ · checked
Exact source text
Weight515 kg
Exterior L × W × H
3.45 × 1.85 × 2.18 mManufacturer sourceConstructions-3D ↗ · checked
Exact source text
Exterior (L x W x H)3.45x1.85x2.18 m
Output
1 t/hManufacturer sourceConstructions-3D ↗ · checked

up to 1 t of material per hour for several hours; 5 to 7 t in a 7-hour day (MiniPrinter machines)

Exact source text

Quote context: up to 1 t of material per hour for several hours; 5–7 t in a 7-hour day (MiniPrinter machines)

The MiniPrinter machines are capable of printing up to 1 ton of material per hour for several hours.
Largest grain
6 (DN50 hose kit) / 4 (DN35 hose) mmManufacturer sourceConstructions-3D ↗ · checked
Exact source text
with a maximum particle size of 6mm in DN50 hose size config. (via the additional DN50 kit), or 4mm in DN35 hose size config.
Print bed
2 standard pallets or 1 large custom palletManufacturer sourceConstructions-3D ↗ · checked

multi-pallet mode prints on one while the other sets

Exact source text

Quote context: multi-pallet mode prints on one while the other sets

The MiniPrinter XL accommodates either 2 standard pallets or 1 custom large pallet
Software subscription
noneManufacturer sourceConstructions-3D ↗ · checked
Exact source text
There is no subscription associated with the MiniPrinter XL.

Capabilities and equipment

Legs
NoField-level source not recorded
Wheels
NoField-level source not recorded
Tracks
NoField-level source not recorded
Level floors
YesField-level source not recorded
Rough ground
Unknown
Stairs
Not applicable
Outdoor use
Unknown
Number of arms
0Field-level source not recorded
Hands or end effectors
ToolField-level source not recorded
Hands included
YesField-level source not recorded
Payload per arm
Not applicable
Payload on body or base
Unknown
Runtime
Unknown
IP rating
Unknown
SDK / development interface
Unknown

Operating conditions and configuration notes

  • Stationary gantry printer for indoor, off-site production; parts are lifted out and installed on site.
  • Sold with a wet-mix pump (needs an external mixer) or a dry-mix pump that can be fed from a silo.
  • Twice the print volume of the MiniPrinter EDU; other specifications are the same (maker FAQ).

Still missing for Constructions-3D MiniPrinter XL

Payload · Runtime · IP rating · Rough ground · Outdoor use · SDK / development interface

Background sources for the capability record

These sources are attached to the record as a whole. Only a source displayed beside a value is linked to that field.

More detail

Evidence profileShow

Robot evidence profile

Checked

Evidence for each configuration

Claims, demonstrations, pilots and deployments describe different levels of evidence. A demonstration does not establish working-site readiness.

Constructions-3D MiniPrinter XL1 published claim · 5 missing capability fields
  1. Published claim

    Prefabricates complex concrete parts for construction sites, such as columns, partitions and openings

    Location not recorded · Event date not recorded

    Maker application example; no named project on the page.

    Constructions-3D ↗ · Manufacturer source · checked

What is still missing

Payload · Runtime · IP rating · Rough ground · Outdoor use

  • Does the starting price include the pump and mixer?
  • Named customers using the MiniPrinter XL, and any German distributor or service partner.
View configuration specifications and source text

Sources

2 pages